hello world!

How to Clean Tiles and Grout: A Step-by-Step Guide

Ever wondered how to clean your tile and grout? Cleaning tiles is a lot of work, but it doesn't have to be so daunting! Cleaning the grout in between tiles can seem like an impossible task, but with these 6 steps you'll have sparkling clean floors in no time. Take a look at our step-by-step guide on how to get rid of all that dirt and dust that's been collecting for months. With this cleaner formula, you will never see dirty or dingy floors again.

Clean the Floor With a Mixture of Water, Vinegar, and Dish Soap

Mix one cup of white distilled vinegar with two cups of warm water. Fill up your bucket or spray bottle half way. Add in some liquid dish soap until you form a nice cleaning solution. Cleaning tiles is not always easy so this recipe will be sure to cut through all the dirt and grime. Use a clean mop or sponge to evenly distribute your mixture across the floor.

Use a Wet/Dry Vacuum to Get Rid of Any Loose Dirt and Debris

The first step is essential because it gets rid of all that excess dust on top of your tiles. Cleaning tiles can be quite tedious so we recommend using a wet/dry vacuum to suck up all of the dirty particles you created by mopping and scrubbing. Cleaning tiles (and grout) are made easier with this simple step!

Spray the Area With Water, Scrubbing in Circles

After vacuuming, use your mop or sponge to evenly distribute water across the floor. Clean tile and grout by using a circular motion with your mop or sponge, just like you would when washing dishes! Cleaning tiles is not only important for appearance's sake, but it will also ensure that there are no germs or bacteria building up on your floors.

Apply a Tile Cleaner Using a Spray Bottle or Sponge

Tile cleaners are readily available at any supermarket or hardware store so don't be afraid to invest in one of these products. Clean tiles by applying this formula evenly across the floor, focusing on areas with lots of buildup such as corners and edges where there can often be more grooves than other parts of the room. Cleaning dirty floorboards is never fun unless you have some magic recipe up your sleeve (like this one)!

Scrub the Grout Using an Old Toothbrush or Scrubbing Brush

Grout can attract all kinds of dust and debris such as hair, sand, insects (ick!), etc., because it has lots of grooves where this junk likes to hang out. Clean dirty floorboards by getting rid of allergens by scrubbing them away with either an old toothbrush or scrubbing brush. Clean dirty floorboards by scrubbing away all of that grime with a firm brush or toothbrush! Cleaning tiles is not always easy, but it's important to do so in order to keep your home clean.

Rinse Away Residue With Clean Water

After you have scrubbed the tiles and grout them down, rinse them off thoroughly using fresh water from your mop bucket (or spray bottle if you are working on small sections). Clean tiles by rinsing all traces of cleaner away until there is absolutely no soap left behind.

Conclusion

Cleaning dirty tiles can be very difficult, but following these easy steps will ensure that you get the best results. Cleaning tiles is essential to keeping your home germ free because grout attracts dirt and germs like a magnet!

Cleaning tiles can seem like a daunting task, but with our step-by-step guide you'll have pristine floors in no time! Cleaning tiles is very important for maintaining a healthy home.

envelopephone-handsetmap-marker linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram