hello world!

Tips to Keep Your Tile and Grout Looking New

If you have tile and grout on your floor, it is important to take care of them. They can get dirty over time, which will make your home look shabby and also one of the toughest task is to clean the tile and make it look new. In this blog post, we are going to share 7 tips that will help keep your tile and grout fresh and looking new for years!

Using Toothbrush and Baking Soda

Clean your grout with a toothbrush and baking soda. Try to use an old toothbrush for this job, as you don't want the bristles on it touching any of your food! Mix together some baking soda and water until they form a paste-like texture. Rub this onto your grouting lines with the brush or another scrubbing tool like a sponge. Then use warm water to rinse away all the paste that is left behind. You may need to repeat multiple times if there are areas where dirt has built up over time.

Using a Mope for Large Tiles

Use a mop for cleaning large tile surfaces in kitchens, bathrooms, hallways etc.. It can be tough getting into every nook and cranny of your tile with a toothbrush, so it is best to use something else. You can buy mops specifically designed for this job or just grab any old one you have around the house.

Right amount of Pressure

Apply the right amount of pressure when mopping to avoid damaging your tiles. It may seem counterintuitive, but if you apply too much force while using a hard surface like tile then the action could scratch up that material and make it look worse than before! So be careful not to scrub too aggressively in order to wipe away dirt on your flooring. Instead try using soft materials such as microfiber tips or sponges instead- they will work better without causing damage.

Removing Tough Stains

Remove tough stains by soaking them in vinegar or club soda. Both of these household items are good at breaking down the organic materials that can cause a stain on your tile and grout. Soaking it will allow for the acid to get into all areas and do its work, as opposed to just sitting on top like some other cleaners might do!

Harsh Chemicals

Avoid using abrasive cleaners on tile flooring- they may be too harsh and damage it over time. There is no need to scrub hard when cleaning an area with clear lines (such as between tiles) because you want those visible borders around each piece so everything looks nice overall. You should use soft sponges instead for this purpose; also make sure you don't have any scratches left behind from the material.

Cleaning the Spills

Clean up spills as soon as possible to avoid any staining on your tile and grout! If you can't get it all cleaned off of a particular area, then use diluted vinegar or club soda to try getting rid of those stains that have already been created- soak them in this solution for an hour before giving it another go with water.


When it comes to tips for keeping your tile and grout looking new, these are just a few! There is plenty more advice out there on techniques that work well. Keep reading this post or find other sources of tips online. They will be lots of help in making sure you're doing the job right. And if you need any professional assistance with taking care of flooring at home, hire professionals like CleaningPROs who can give you all sorts of tips and tricks to make things go smoothly.

envelopephone-handsetmap-marker linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram